LHST – Twin Hinge Clamp

Twin Leverage Hydraulic Cylinder

Available in 3 different sizes: 4.89 kN, 7.56 kN and 11.57 kN total clamping force (at 350 bar / 35 MPa).

It has a significantly increased vertical clamping stroke compared to standard linkage arms; allowing clamping through a hole on the workpiece surface.

The patented rotating linkage mechanism offers 360-degree flexibility in arm/body positioning. This feature provides flexibility in internal channeling and fixture design.

The load balancing mechanism ensures equal clamping force as long as the workpiece surface difference remains within 1.5 mm.

You can clamp two parts at once using a single linkage arm.

The top flange body is designed to be compatible with manifold mounting or piping systems.

Arms must clamp onto flat surfaces.

Arms are sold separately.

Optional inlet port flow control is an internally mounted measuring device equipped with a reverse free-flow check valve.

Optional inlet port sequence valve is a sequencing device equipped with a reverse free-flow check valve.